 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| (R) RF1319D 868.95 MHz SAW Filter * * * * Ideal Front-End Filter for European Wireless Receivers Low-Loss, Coupled-Resonator Quartz Design Simple External Impedance Matching Pb Complies with Directive 2002/95/EC (RoHS) The RF1319D is a low-loss, compact, and economical surface-acoustic-wave (SAW) filter designed to provide front-end selectivity in 868.95 MHz receivers. Receiver designs using this filter include superhet with 10.7 MHz or 500 kHz IF, direct conversion and superregen. Typical applications of these receivers are wireless remote-control and security devices operating in Europe under ETSI I-ETS 300 220, in Germany under FTZ 17 TR 2100, in the United Kingdom under DTI MPT 1340 (for automotive only), in France under PTT Specifications ST/PAA/TPA/AGH/1542, and in Scandinavia. This coupled-resonator filter (CRF) uses selective null placement to provide suppression, typically greater than 40 dB, of the LO and image spurious responses of superhet receivers with 10.7 MHz IF. RFM's advanced SAW design and fabrication technology is utilized to achieve high performance and very low loss with simple external impedance matching (not included). Our new patent pending solder seal process utilizes a Faraday shield lid, which improves out of band rejection. SM3838-8 Case 3.8 x 3.8 Typical 868.95 2.2 4.0 900 Maximum Units MHz dB kHz Electrical Characteristics Characteristic Center Frequency @ 25C Insertion Loss 3 dB Bandwidth 10 - 700 MHz 700 - 830 MHz 830 - 850 MHz Attenuation: (relative to ILmin) 850 - 865 MHz 871 - 878 MHz 878 - 883 MHz 883 - 900 MHz 900 - 1000 MHz Temperature Frequency Aging Impedance @ fC Freq. Temp. Coefficient Absolute Value during the First Year Input ZIN = RIN/CIN Output ZOUT = ROUT/COUT 7 Inch Reel 13 Inch Reel FTC |fA| ZIN ZOUT 3, 4 5 1 1, 3 Absolute Frequency Sym fC IL BW3 Notes 1, 2, 3 1 1, 3 500 50 40 35 20 21 15 28 40 Minimum 650 55 45 40 24 30 20 35 45 0.032 <10 dB ppm/C2 ppm/yr 28.8 // 1.93pF 26.9 // 2.2pF 436 // YWWS 500 Pieces/Reel 3000 Pieces/Reel Lid Symbolization (in addition to Lot and/or Date Codes) Standard Reel Quantity Standard Reel Quantity 9 CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture which is connected to a 50 test system with VSWR 1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, fc. Note that insertion loss and bandwidth are dependent on the impedance matching component values and quality. 2. The frequency fc is defined as the midpoint between the 3dB frequencies. 3. Where noted, specifications apply over the entire specified operating temperature range of -40 to 90C. 4. The turnover temperature, TO, is the temperature of maximum (or turnover) frequency, fo. The nominal frequency at any case temperature, Tc, may 5. 6. 7. 8. 9. be calculated from: f = fo [1 - FTC (To - Tc)2]. Frequency aging is the change in fc with time and is specified at +65C or less. Aging may exceed the specification for prolonged temperatures above +65C. Typically, aging is greatest the first year after manufacture, decreasing significantly in subsequent years. The design, manufacturing process, and specifications of this device are subject to change without notice. One or more of the following U.S. Patents apply: 4,54,488, 4,616,197, and others pending. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. Tape and Reel Standard for ANSI / EIA 481. RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com RF1319D-082504 Page 1 of 2 868.95 MHz Absolute Maximum Ratings Rating Input Power Level DC Voltage Storage Temperature Operable Temperature Range Soldering Temperature SAW Filter Value 10 12 -40 to +125 -40 to +125 (10 seconds / 5 cycles max.) 260 Units dBm VDC C C C Electrical Connections Pin 1 2 3 4 5 6 7 8 Connection Input Ground Input Ground Case Ground Output Ground Output Ground Case Ground 3 A 1 2 B 8 C E 8 H7 6 5 4 D F 7 6 5 1 2 3 G 4 Matching Circuit to 50 Case Dimensions Dimension 7 10 nH Output 1 12 nH 6 5 8 4 2 3 Input A B C D E F G H Min 3.6 3.6 1.00 0.95 0.90 0.50 2.39 1.40 mm Nom 3.8 3.8 1.20 1.10 1.0 0.6 2.54 1.75 Max 4.0 4.0 1.40 1.25 1.10 0.70 2.69 2.05 Min 0.14 0.14 0.04 0.037 0.035 0.020 0.090 0.055 Inches Nom 0.15 0.15 0.05 0.043 0.04 0.024 0.100 0.069 Max 0.16 0.16 0.055 0.05 0.043 0.028 0.110 0.080 OPTIONAL Electrical Connections Pin 1 2 3 4 5 6 7 8 Connection Input Input Ground Ground Case Ground Output Output Ground Ground Case Ground Matching Circuit to 50 12 nH 7 6 10 nH Output 1 8 4 2 3 Input 5 RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com RF1319D-082504 Page 2 of 2 |
Price & Availability of RF1319D
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |